Product Specifications / Features
1.Name:LIKE aluminum building material&aluminum honeycomb panel
2.Material: Aluminum alloy, the grade of aluminum alloy can be
selected according to the actual requirements
3.Surface treatment:Service coating for back, PVDF coating for the
front sheet. Other special requirements will be fulfilled.
1)The honeycombed cores of different sizes have an extremely level
and Straight degree and the feature of being not easy to distort.
2)The LIKE aluminum honeycomb panels and ceiling we produce mainly
use the fluorine-carbon to coat the aluminum plates, mostly
importantly, the continuous pre-rolling and coating technique has
been used therefore it enables to finish the aluminum roasting for
one time only.
3)There is no chromatic aberration for the product, which has a
good flow level for the coating and a reliable quality.
4)It can keep the clean and bright appearance for the building for
a long them since it has a good adhesive force and resistance to
5)The honeycombed plate with an interlayer plate is only 1/5of
weight of the aluminum plate of the same rigidness and/1/10 of that
of the steel plate.
6)honeycomb cores of the honeycomb composite plates are separated
into many sealed compartments, which block the flow of air, and
also the heat and sound waves, the sound source of 100-3200Hz can
be reduced to 20-30db, the heat conduction of 0.1040.130 W/M.K,
therefore energy absorption ability of the honeycomb plates are up
to 150-3products500 KL/M2, which makes the products as idea;
5.Specification of LIKE building material
-front plate thickness:0.6mm-1.0mm
-base plate thickness:0.5mm-0.8mm
Well and High Quality Control ,
Competitive Prices ,